Product
VGA, YPbPr, CVBS Signal Optical Transmission Receiver
TS-9507VR is a multimode or single-mode fiber transmission extender which support component video signal. It will transmit CVBS, YPbPr, VGA video signal and audio signals into optical fiber signal to transmit. Transmission distance is up to 20 km, and can simultaneously transmit two-way RS-232, i
TS-9507VR is a multimode or single-mode fiber transmission extender which support component video signal. It will transmit CVBS, YPbPr, VGA video signal and audio signals into optical fiber signal to transmit. Transmission distance is up to 20 km, and can simultaneously transmit two-way RS-232, it can be used with single fiber transmission transmitter or matrix fiber output card.
Features
* Support VGA、YPbPr、CVBS signal output
* Support Bi-directional IR, RS-232 transmission
* Single-mode fiber: 2-20km, 1920x1080p @ 60Hz.
* OM3multimode fiber: Less than 500 meters, 1920x1080p @ 60Hz
Specifications
| Model | TS-9507VR |
| VGA Video |
|
| Interface | 15-pinDB female interface |
| Bandwidth | RGBHV |
| Signal Type | 0.63Vpp - 0.9Vpp |
| Gain | <-30dB @ 5MHz |
| Signal Strength |
|
| Impedance | Composite video CV / Component Video YPbPr |
| Return Loss | CV: 150MHz @ -3dB |
| Composite Video CV / Component | 0.1 °, 3.58-4.43MHz |
| Video YPbPr Video Output | 1Vpp: Composite video (CVBS) |
| Interface | 0.3Vpp: component video PbPr / CbCr |
| Signal Type | 75 Ω |
| Gain |
|
| Bandwidth | 0 |
|
| 0.01% @ 1 kHz (at rated voltage) |
| Differential phase error | > 75dB @: 20 Hz ~ 20 kHz |
| Differential gain error | > 10kΩ (balanced and / or unbalanced connection) |
| Signal strength | + 19.5dBu, (balanced or unbalanced connection) |
|
| 15-pinDB female interface |
|
| RGBHV |
| Minimum / Maximum level | 0.63Vpp - 0.9Vpp |
| Output Impedance | <-30dB @ 5MHz |
| Return Loss |
|
| Audio Signal | Composite video CV / Component Video YPbPr |
| Interface | CV: 150MHz @ -3dB |
| Gain | 0.1 °, 3.58-4.43MHz |
| Frequency response | 1Vpp: Composite video (CVBS) |
| THD & Noise | 0.3Vpp: component video PbPr / CbCr |
| S / N) | 75 Ω |
| CMRR |
|
| Signal Type | 0 |
| Input Impedance | 0.01% @ 1 kHz (at rated voltage) |
| Output | > 75dB @: 20 Hz ~ 20 kHz |
| Maximum Input level | > 10kΩ (balanced and / or unbalanced connection) |
| Gain Error | + 19.5dBu, (balanced or unbalanced connection) |
| RS-232 |
|
| Serial Port Control Interface | 3bit 3.8 interface |
| Signal Type | Digital |
| Level Type | RS-232 level |
| Signal Direction | Bidirectional communication |
| Baud Rate | Min: 4800bps Max: 115200bps |
| Data Bits | 8 |
| Stop Bit | 1 |
| Correction Bit | None |
| Flow Control | None |
| Level Delay | 500 ns |
| Peak Level | +/- 15V |
| Optical Output Section |
|
| Optical Output Port | LC connector |
| Fiber Type | Multimode / Single Mode (optional) |
| Wavelength | Multimode 850nm / Single Mode: 1310-1620nm (optional) |
| Multimode Fiber Standard | 50 / 125μm |
| Single-mode Fiber Standard | 9 / 125μm |
| Interface Bandwidth | Forward: 10.2Gbps, the reverse: 3.125Gbps |
| Bit Clock Jitter | <0.15 Tbit |
| Bit Rise Time | <0.3Tbit (20% - 80%) |
| Bit Fall Time | <0.3Tbit (20% - 80%) |
| Maximum Recommended | OM3 multimode fiber output: less than 500 m, while in |
| Distance | 1920x1080p @ 60Hz |
|
| Single-mode fiber: 2-20 km, while in 1920x1080p @ 60Hz |
| Specification |
|
| Power Supply | Power adapter, 12VDC / 1.5A |
| Maximum Power Consumption | 6W |
| Temperature | Storage& operation temperature: -20 ℃ ~ + 70 ℃ |
| Humidity | Storage& operation humidity: 10% ~ 90% |
| Dimensions | 162 (L) X 195 (W) X 35 (H) |