Product
VGA, UPbPr, CVBS Signal Transmission Receiver
TS-9507VR is a multimode or single-mode fiber transmission extender which support component video signal. It will transmit CVBS, YPbPr, VGA video signal and audio signals into optical fiber signal to transmit. Transmission distance is up to 20 km, and can simultaneously transmit two-way
TS-9507VR is a multimode or single-mode fiber transmission extender which support component video signal.
It will transmit CVBS, YPbPr, VGA video signal and audio signals into optical fiber signal to transmit. Transmission distance is up to 20 km, and can simultaneously transmit two-way RS-232, it can be used with single fiber transmission transmitter or matrix fiber output card.
Features
* Support VGA、YPbPr、CVBS signal output
* Support Bi-directional IR, RS-232 transmission
* Single-mode fiber: 2-20km, 1920x1080p @ 60Hz.
Specifications
| Model | TS-9506VR |
| VGA Video |
|
| Interface | 15 - pinDB mother interface |
| Bandwidth | 330MHz |
| Signal Types | RGBHV |
| Gain | 0 dB |
| Signal Strength | 0.63Vpp - 0.9Vpp |
| The Output Resolution | The output resolution. |
| Impedance | 50Ω |
| Return loss | <-30dB@5MHz |
| Composite Video CV/Component |
|
| Video YPbPr Video Output |
|
| Interface | HD-DB15 mother interface |
| Signal Types | Composite video CV/component video YPbPr |
| Gain | 0 dB |
| Bandwidth | CV: 150MHz @ -3dB |
|
| YPbPr: 350 MHz @ -3dB |
| Differential Phase Error | 0.1°，3.58-4.43MHz |
| When The Differential Gain Error | 0.1%，3.58-4.43MHz |
| Signal Strength | 1 VPP: composite video (CVBS) |
|
| 1 VPP: the Y component video |
|
| The PbPr/CbCr Vpp 0.3: component video |
| Minimum/Maximum Level | Analog signal: - 2 v/v + 2 |
| Output Impedance | 75 Ω |
| Return Loss | <-30dB@5MHz |
| Audio Signal |
|
| Interface | 5bit 3.8 interface |
| Gain | 0 dB |
| Frequency response | 20 Hz ~ 20 kHz |
| Total Harmonic Distortion | 0.01% @ 1 kHz (rated voltage) |
| Plus noise |
|
| S/N | >80dB at Vin=0 V |
| CMRR | >75dB@:20 Hz ~ 20 kHz |
| Signal Types | Stereo (unbalanced connection) |
| Impedance | Input: > 10 kΩ (balance or/non equilibrium method) |
|
| Output: 50 Ω (non-equilibrium connection) |
| Maximum Input level | +19.5dBu, (balanced or unbalanced connection) |
| Gain Error | ±0.1dB @20 Hz ~ 20 kHz |
| IR Infrared |
|
| Interface | 3bit 3.8 interface |
| Signal Types | Input: digital |
|
| Output: digital |
| Level Type | PLL level |
| The wavelength | 850nm |
| Carrier frequency | 38KHz |
| The RS - 232. |
|
| interface | 3bit 3.8 interface |
| Signal Types | Digital |
| Level type | RS-232 Level |
| Signal Direction | Bidirectional communication |
| Baud Rate | Min:4800bps Max:115200bps |
| Data Bits | 8bit |
| Stop Bit | 1bit |
| Correction Bit | None |
| Flow Control | None |
| Level Delay | 500 ns |
| Peak Level | +/-15V |
| HDBadet Output Interface |
|
| Interface | High Speed Rj45 |
| Transmission Distance | Adopt CAT5e / 6 shielded wire up to 100 m |
| Specification |
|
| Power Supply | 12 VDC / 1.5 A |
| Max Power Consumption | 4W |
| Temperature | Storage, temperature: - 20 ℃ ~ + 70 ℃ |
| Humidity | Storage, use, humidity: 10% ~ 90% |
| Dimesions (mm) | 162(L) X 195(W) X 35(H) |
