Product
RGB Signal Line Drive
In the multimedia application system, often need a display terminal can display high-definition picture quality in large distance within the scope of application. To solve this kind of problems in engineering and design of TS-9120 video signal pre emphasis driver, which can achie
In the multimedia application system, often need a display terminal can display high-definition picture quality in large distance within the scope of application.
To solve this kind of problems in engineering and design of TS-9120 video signal pre emphasis driver, which can achieve high bandwidth (400Mpixel band wide), high quality, the video signal transmission distance 120 meters long, to ensure that the signal is not affected by external interference in the transmission process, does not appear to decay; can improve the image signal distortion in the long distance transmission, such as ghost, trailing.
Features
* Support signal formats: RGBHV, RsGsBs, YPbPr/YCbCr.
* Support the video signal brightness and sharpness, the front segment adjustable pre-emphasis.
* Support (pixel band wide) @-3dB 400M bandwidth. All outputs the perfect support for Full HD 1920x1200@60Hz or 1920x1080p@60Hz.
* With support for the ideal reduction maximum transmission distance is 120 meters (1024x768@60).
* HV input impedance select button, select 510R or 75R input matching.
Specifications
| Model | TS-9120 |
| Video Input |
|
| Interface | 15-pin HD bus interface |
| signal intensity | 1Vpp The signal intensity or S-video in the Y component video, composite video; 0.7Vpp RGB (computer signal); |
|
| 0.3Vpp component video in Cb/Cr or Pb/Pr, S-video C |
| Minimum / maximum level analog signal: | analog signal: 0.5V ~ 2.0Vpp |
| Impedance | 75Ω |
| The return loss | -30dB@5MHz |
| Synchronous | 0.3V-0.4Vpp |
| maximum DC offset error | 15mV |
| Long distance driving interface part video |
|
| Gain | The minimum 0.2dB (0~10MHz bandwidth) |
|
| The maximum 1.8dB (~ (0 10MHz bandwidth) |
|
| The minimum 0.4dB (10M ~ 400MHz bandwidth) |
|
| The maximum >6dB (10 ~ 400MHz) |
| Differential phase error | <2.0 degrees, 3.58MHz (compensation file only 40 meters below.) |
| Differential gain error | 0.3%, 3.58-4.43MHz(compensation file only 40 meters below.) |
| The maximum transmission delay 5nS | 5nS(±1nS) |
| Signal types | RGBHV, RGBS, RGsB, RsGsBs, YPbPr/YCbCr, S-Video, composite video signal (CVBS) |
| Long distance driving part video output |
|
| interface | BNC bus interface |
| Minimum / maximum level | analog signal: 0.5V ~ 2.0Vpp |
| Impedance | 75Ω |
| return loss | -30dB@5MHz |
| DC compensation | ±5mV |
| Synchronous signal |
|
| Input / output type | RGBHV, RGBS, RGsB, RsGsBs |
| The input level | 0.5V- 5.0Vpp,: 4.0Vpp(normal) |
| Output level | AGC-TTL: 5Vpp (unloaded) |
| Input impedance | 510Ω/ low resistance optional |
| output impedance | 75 ohms (monitor output interface); 75Ω (line driver output interface |
| polarity | Positive or negative (fully consistent with the input) |
| Control types |
|
| Methods | Manual by selector, the subjective feelings prevail. |
| Specifications |
|
| Power | DC 9V/1.5A |
| Temperature | -20℃~ +70℃ |
| Humidity | 10% ~ 90% |
| Install | Mount |
| Size (mm) | 162(L) X 195(W) X 35(H) |