Product
Intelligent 32Channel HD Mixed Insertion Matrix
Matrix switcher is a matrix signal switcher with flexible configuration. It adopts high-performance hardware design, perfectly supports all kinds of high-definition digital/analog signal switch processing, and supports bi-directional RS-232 and bi-directional IR signal
Matrix switcher is a matrix signal switcher with flexible configuration.
It adopts high-performance hardware design, perfectly supports all kinds of high-definition digital/analog signal switch processing, and supports bi-directional RS-232 and bi-directional IR signal switching function.
Providing a one-stop solution for a variety of video and control signal distribution switching processes, it can be widely used in radio and television engineering, multimedia conference room, large screen display engineering, television education, command and control centers, etc.
Features
* Input and output: max supporting 32 signal inputs and 32 signal outputs.
* Card-insert construction: input signal types: VIDEO, S-Video, VGA, YpbPr, DVI, HDMI, SDI, Fiber, HDBaseT; output signal types: HDMI,DVI,VGA ,YpbPr, VIDEO, HDBaseT, Fiber, SDI. Card design is easy for extension and change.
* Seamless switching function.
* Supporting embedded dual IR and RS-232 control signal switching function (need to match up with HDBaseT, FB board card and relevant transmitter).
* Supporting HDCP managerment, encrytion and decoding HDCP content can be set up to make sure that the disply of signal source is normal.
* Supporting EDID managerment, it can stock 8 groups EDID datas. The output equipment EDID can be read and the stocked EDID can be used to any input card, which can send the EDID code to EDID storage area by the serial port and the current output EDID code can be read by the serial port.
* It has power-failure memory function and site memory function, and power-failure site protection function; it can preserve and invoke 10 switching status.
* Supporting forward direction high speed channel and embedded control signal separation switching mode.
* Supporting full HD: HDPC:1920X1200P@60_24bit,HDTV:1920X1080P@60_36bit.
* Luxury crystal button and flashing directive function. The current switching signal can be obtained directly by LCD conveniently.
* Supporting 3D, HDMI 1.4, HDCP1.4, and DVI 1.0 protocol. Supporting high color depth and high 3.25Gbps speed.
* It is with 2-Channel RS-232 communication interfaces.
* Have 1-way network port, can control remotely via Ethernet.
* Built-in universal power supply.
Model |
TS-9232H |
Interface |
|
Input Crd Qty |
4 |
Output Card Qty |
4 |
Input Lines |
32 |
Output Lines |
32 |
Supporting Input Card Type |
TS-9208HR, TS-9208DR, TS-9208CR, TS-9208TR, |
|
TS-9208GR, TS-9208SR |
Supporting Output Card Type |
TS-9208HC, TS-9208DC, TS-9208TC, TS-9208CC, |
|
TS-9208GC, TS-9208SC |
Port Bandwidth |
3.25Gbps, full digital |
Serial Control |
|
Quantity |
2 |
Serial Control Interface |
RS-232, 9- pins D type port |
Baud Rate and Protocol |
Baud rate: 9600, data bits: 8 bits, stop bit: 1, |
|
Non odd-even check bit |
Serial Control Port Construction |
2 = TX, 3 = RX, 5 = GND |
Ethernet Control |
|
Ethernet Controal Port |
RJ-45 female interface |
Ethernet Control Protocol |
TCP/IP |
Ethernet Control Speed |
self-adaption 10M/100M, full duplex or half duplex |
Specification |
|
Power Supply |
~110V/60Hz or ~230V/50Hz, |
|
International self-adaption power supply |
Max Consumption |
107W |
Product Weight |
20Kg |
Storage and Operation Temperature |
-20℃~ +70℃ |
Storage and Operation Humidity |
10% ~90% |
Cabinet Size |
10U |
Mean time Between Failures |
30,000 hours |
Size |
484 x 354 x 440mm |