Product
HDMI Fiber Transmission Transmitter
TS-9507HT is an extender support for high-resolution HDMI video signal transmission by single or multimode fiber transmission. It will transfer HDMI video signals into optical fiber signal transmission, transmission distance up to 20km and supports a maximum resolution 1900 x 1
TS-9507HT is an extender support for high-resolution HDMI video signal transmission by single or multimode fiber transmission.
It will transfer HDMI video signals into optical fiber signal transmission, transmission distance up to 20km and supports a maximum resolution 1900 x 1200 @ 60Hz, and can simultaneously transmit two-way RS-232, two-way infrared signals, can be used with single core fiber transmission fiber optic transmitter or matrix output card;
Features
* Support for single-mode fiber transmission of high resolution HDMI signal;
* Support the transmission of Audio signals, IR signal and RS-232signals;
* Support site refresh EDID
* Single-mode fiber:2-20km, 1920x1080p @ 60Hz.
* Om3multimode fiber: Less than 500 meters, 1920x1080p @ 60Hz
Specifications
| Model | TS-9507HT |
| HDMI Video |
|
| Interface | HDMI-A connector |
| Support Protocol | HDMI1.4，HDCP1.4，DVI1.0 |
| Pixel Bandwidth | 225MHz, full-digital |
| Interface Bandwidth | 3.25Gbps,full-digital |
| Max Supported Resolution | HDPC: 1920x1200P@ 60_24bit |
|
| HDTV: 1920x1080P@60_36bit |
| Signal Type | HDMI 1.4 / T.M.D.S. full-digital signal |
| Signal Strength | T.M.D.S. +/- 0.4Vpp |
| Min/Max Level | T.M.D.S. 2.9V/3.3V |
| Impedance | 50Ω |
| Audio Signal |
|
| Audio Input | 1 channel simulation stereo input, 3.5MM The headset seat |
| Frequency Response | 20Hz - 20KHz ±0.05db |
| Input Level | 2Vrms(MAX) |
| Serial Port Control |
|
| Serial Port Control Interface | 3bit 3.8 interface |
| Signal Type | Digital |
| Level Type | RS-232 level |
| Signal Direction | Bidirectional communication |
| Baud Rate | Min: 4800bps Max: 115200bps |
| Data Bits | 8 |
| Stop Bit | 1 |
| Correction Bit | None |
| Flow Control | None |
| Level Delay | 500 ns |
| Peak level | +/- 15V |
| HDMI Monitor Output Port |
|
| Interface | HDMI-A interface |
| Supported Protocol | HDMI1.4, HDCP1.4, DVI1.0 |
| Pixel Bandwidth | 225MHz,full digital |
| Interface Bandwidth | 3.25Gbps, full digital |
| Maximum Supported Resolution | HDPC: 1900x1200 @ 60Hz |
|
| HDTV: 1920x1080P @ 60Hz |
| Signal Types | Compatible with HDMI1.4, HDCP1.4, DVI1.0 |
| Signal Strength | T.M.D.S. +/- 0.4Vpp |
| Minimum / Maximum Level | T.M.D.S. 2.9V / 3.3V |
| Impedance | 50Ω |
| Optical Output Section |
|
| Optical Output Port | LC connector |
| Fiber Type | Multimode / Single Mode (optional) |
| Wavelength | Multimode 850nm / Single Mode: 1310-1620nm (optional) |
| Multimode Fiber Standard | 50 / 125μm |
| Single-mode Fiber Standard | 9 / 125μm |
| Interface Bandwidth | Forward: 10.2Gbps, the reverse: 3.125Gbps |
| Bit Clock Jitter | <0.15 Tbit |
| Bit Rise Time | <0.3Tbit (20% - 80%) |
| Bit Fall Time | <0.3Tbit (20% - 80%) |
| Maximum Recommended | OM3 multimode fiber output: less than 500 m, while in |
| Distance | 1920x1080p @ 60Hz |
|
| Single-mode fiber: 2-20 km, while in 1920x1080p @ 60Hz |
| Specification |
|
| Power Supply | Power adapter, 12VDC / 1.5A |
| Maximum Power Consumption | 5W |
| Temperature | Storage& operation temperature: -20℃ ~ + 70℃ |
| Humidity | Storage& operation humidity: 10% ~ 90% |
| Dimensions | 162 (L) X 195 (W) X 35 (H) |
