Product
DVI Signal Optical Transmission Transmitter
TS-9507DT is an extender support for high-resolution DVI video signal transmission by single or multimode fiber transmission. It will transfer DVI video signals into optical fiber signal transmission, transmission distance up to 300 meters and supports a maximum resolution 1900 × 1200 @ 60Hz, a
TS-9507DT is an extender support for high-resolution DVI video signal transmission by single or multimode fiber transmission. It will transfer DVI video signals into optical fiber signal transmission, transmission distance up to 300 meters and supports a maximum resolution 1900 × 1200 @ 60Hz, and can simultaneously transmit two-way RS-232, two-way infrared signals, can be used with single core fiber transmission fiber optic transmitter or matrix output card;
Features
Support for single-mode fiber transmission of high resolution multi-DVI signal;
Support the transmission of Audio signals, IR signal and RS-232signals;
Support site refresh EDID
Single-mode fiber:2-20km, 1920x1080p @ 60Hz.
OM3multimode fiber: Less than 500 meters, 1920x1080p @ 60Hz
Specifications
| Model | TS-9507DT |
| DVI Video |
|
| Interface | DVI-D interface |
| Support protocol | DVI1.0，EDID1.4 |
| Pixel bandwidth | 225MHz, full digital |
| Interface Bandwidth | 3.25Gbps, full digital |
| Max Supported resolution | HDPC: 1920x1200P@ 60_24bit |
|
| HDTV: 1920x1080P@60_36bit |
| Signal Type | DVI 1.0 / T.M.D.S. full digital signal |
| Signal Strength | T.M.D.S. +/- 0.4Vpp |
| Min/Max Level | T.M.D.S. 2.9V/3.3V |
| Impedance | 50Ω |
| Audio Signal |
|
| Audio Input | 1 channel simulation stereo input, 3.5MM The headset seat |
| Frequency Response | 20Hz - 20KHz ±0.05db |
| Input Level | 2Vrms(MAX) |
| Serial port control |
|
| Serial port control interface | 3bit 3.8 interface |
| Signal Type | Digital |
| Level Type | RS-232 level |
| Signal direction | Bidirectional communication |
| Baud Rate | Min: 4800bps Max: 115200bps |
| Data bits | 8 |
| Stop bit | 1 |
| Correction bit | None |
| Flow Control | None |
| Level delay | 500 ns |
| Peak level | +/- 15V |
| DVI Monitor output port |
|
| Interface | DVI-D interface |
| Supported protocols | DVI1.0, EDID1.4 |
| Pixel bandwidth | 225MHz , full digital |
| Interface Bandwidth | 3.25Gbps, full digital |
| Max Supported resolution | HDPC: 1900x1200@60Hz |
|
| HDTV: 1920x1080P@60Hz |
| Signal Type | DVI 1.0/ T.M.D.S. full digital signal |
| Signal Strength | T.M.D.S. +/- 0.4Vpp |
| Min/Max Level | T.M.D.S. 2.9V/3.3V |
| Impedance | 50Ω |
| Optical output section |
|
| Optical output port | LC connector |
| Fiber Type | Multimode / Single Mode (optional) |
| Wavelength | Multimode 850nm / Single Mode: 1310-1620nm (optional) |
| Multimode fiber standard | 50 / 125μm |
| Single-mode fiber standard | 9 / 125μm |
| Interface bandwidth | Forward: 10.2Gbps, the reverse: 3.125Gbps |
| Bit clock jitter | <0.15 Tbit |
| Bit rise time | <0.3Tbit (20% - 80%) |
| Bit fall time | <0.3Tbit (20% - 80%) |
| Maximum recommended distance | OM3 multimode fiber output: less than 500 m, while in 1920x1080p @ 60Hz |
| Single-mode fiber: 2-20 km, while in 1920x1080p @ 60Hz | |
| Specification |
|
| Power supply | Power adapter, 12VDC / 2A |
| Maximum power consumption | 5W |
| Temperature | Storage& operation temperature: -20 ℃ ~ + 70 ° C |
| Humidity | Storage& operation humidity: 10% ~ 90% |
| Dimensions | 162 (L) X 195 (W) X 35 (H) |