Product
DVI fiber optic transmission receivers
TS-9507DR is a support for high-resolution DVI video signals single multimode fiber transmission extender, it will transfer DVI video signals into optical fiber signal transmission, transmission distance up to 300 meters and supports a maximum resolution 1900 × 1200 @ 60Hz, and can simultaneous
TS-9507DR is a support for high-resolution DVI video signals single multimode fiber transmission extender, it will transfer DVI video signals into optical fiber signal transmission, transmission distance up to 300 meters and supports a maximum resolution 1900 × 1200 @ 60Hz, and can simultaneously transmit two-way RS-232, two-way infrared signals, can be used with single core fiber transmission fiber optic transmitter or matrix output card;
Features
■ Support for single-mode fiber transmission of high resolution multi-DVI signal;
■support the transmission of Audio signals, IR signal and RS-232signals;
■single-mode fiber:2-20km,whilein1920x1080p @ 60Hz.
■ OM3multimode fiber: less than300 meters,at the time of1920x1080p @ 60Hz.
Specifications
| Model | TS-9507DR |
| DVI Video |
|
| Interface | DVI-D interface |
| Supported Protocols | DVI1.0,HDMI1.3a,HDCP1.3 |
| Pixel bandwidth | 225MHz , full digital |
| Interface Bandwidth | 6.75Gbps, full digital |
| Signal Type | DVI 1.0 / HDMI 1.3a normative DVI-D/ HDMI full digital signal T.M.D.S. |
| Max Supported resolution | HDPC: 1900x1200@60Hz |
| HDTV: 1920x1080P@60Hz | |
| Clock Jitter | <0.15 Tbit |
| Risetime | <0.3Tbit (20%--80%) |
| Falltime | <0.3Tbit (20%--80%) |
| Signal Strength | T.M.D.S. +/- 0.4Vpp |
| Min/Max Level | T.M.D.S. 2.9V/3.3V |
| Impedance | 50Ω |
| The maximum error of the dc bias | +/-15mV |
| Suggested maximum input range | Less than 10m，when 1920x1080p@60Hz |
| Audio Signal Output |
|
| Interface | 5a 3.8mm Phoenix |
| Gain | 0 dB |
| Frequency Response | 20 Hz ~ 20 kHz |
| THD+N | 0.01% @ 1 kHz （rated voltage condition） |
| （S/N ）Ratio | >80dB at Vin=0 V |
| Stereo crosstalk | >80dB @ 1 kHz |
| CMRR | >75dB @: 20 Hz ~ 20 kHz |
| Signal Type | Stereo (unbalanced connection) |
| Impedance | Output：50Ω （unbalanced connection） |
| Max Output Level | +19.5dBu, （unbalanced connection） |
| Gain Error | ±0.1dB @20 Hz ~ 20 kHz |
| IR |
|
| Interface | 3a 3.8mm Phoenix |
| Signal Type | Input：Digital Output：Digital |
| Level Type | PLL Level |
| Wavelength | 850nm |
| Carrier Frequency | 38KHz |
| RS-232 |
|
| Interface | 3位3.8mm Phoenix |
| Signal Type | Digital |
| Level Type | RS-232 Level |
| Signal Direction | two way communication |
| Baud Rate | Min:4800bps Max:115200bps |
| Data Bit | 8a |
| Stop Bit | 1a |
| Correction digit | None |
| Stream Control | None |
| Level Delay | 500 ns |
| Level Peak | +/-15V |
| Fiber Input Part |
|
| Fiber Input connector | SC connector |
| Fiber Type | Multimode /Single Mode（can be chosen） |
| Wavelength | Multimode: 850nm /Single Mode: 1310 –1620nm（can be chosen） |
| Multimode fiber specification | 50/125μm |
| Signal -mode fiber specification | 9/125μm |
| Interface bandwidth | Forward：6.25Gbps，Inversion：3.125Gbps |
| lock Jitter | <0.15 Tbit |
| Risetime | <0.3Tbit (20%--80%) |
| Falltime | <0.3Tbit (20%--80%) |
| Suggested maximum input range | Multimode fiber：less than 300m，when1920x1080p@60Hz |
| Signal -mode fiber ：2-20km，when 1920x1080p@60Hz | |
| specification |
|
| Power Supply | Supply adapter，12VDC/2A |
| Max Power Consumption | 4W |
| Temperature | Storage Operating Temperature: -20℃～ +70°C |
| Moisture | Storage Operating Moisture:10% ～90% |
| Dimension | 162(L) X 195(W) X 35(H) |
| MTBF | 30,000 hours |
